MINOLTA-QMS Magicolor 6110 GN Guide de l'utilisateur télécharger pdf (Page 45)

Media

Where can I get more information?

See your application documentation for specific information on formatting

data and printing.

Orientation

Check your transparency media instructions to confirm if the

media should be placed in the tray long-edge fed with the

non-striped edge first and striped side down.

Type

Use any full-color transparencies (also known as OHP film)

that meet normal photocopier standards. We recommend

„ Q-Media Transparency Media for the magicolor 6100

series for color printing

„ 3M CG3700

„ 3M CG3710

„ Xerox 3R3117

„ Xerox 3R5764

Weight

24–41.75 lb (90–157 g/m²)

Print Mode

to Select

Automatic

Also, select Transparency in the driver.

Duplexing

Not supported

Notes

„ Remove transparency media as soon as possible from the

output tray to avoid built-up static.

„ If you touch the face of transparencies with your bare

hands, print quality may be affected.

„ Do not handle transparency media too much. Do not fan

transparency media before loading it. Resulting static elec-

tricity may cause printing errors.

„ Keep the media path clean. Transparencies are especially

sensitive to a dirty media path. If there are shadows on

either the top or the bottom of the sheets, see “Cleaning

the Printer Interior” in the

Maintenance Guide.

„ You can print continuously with transparencies. However,

this could affect the media feed, depending on the media

quality and printing environment. If problems occur, stop

the continuous print and print one sheet at a time.

„ Use transparencies that can withstand the fusing tempera-

ture (392° F/200° C).

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 215 216

Commentaires sur ces manuels

Pas de commentaire

MINOLTA-QMS Magicolor 6110 GN Guide de l'utilisateur Page 45

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimantes laser/LED MINOLTA-QMS Magicolor 6110 GN